|
|
|
| Occupational hazard risk assessment with Singapore exposure semi-quantitative evaluation methods in energy-saving lamp industry |
| RUAN Xiao-ying,FU Hong,ZHANG Xu-hui,YANG Zhang-ping,WANG Jing
|
| School of Public Health, Zhejiang University, Hangzhou 310058, China |
|
|
|
|
Abstract Objective To explore and establish an appropriate occupational risk assessment model for energy-saving lamp industry in China, and further to provide reference for risk management.Methods Based on actual conditions on site of 3 different scale energy-saving lamp manufacture factories, Singapore exposure semi-quantitative evaluation methods was used to analyze and evaluate the harm of the work sites contacted with chemical factors, according to which can provide a proposal for risk management.Results The primary occupational chemical hazards in these 3 factories include carbon monoxide, carbon dioxide, aluminium oxide dust, butyl acetate, mercury metal(vapor) and cement dust(free SiO2<10%). Mercury-injecting of the big scale one has medium risk besides all work sites have low risks or below.Conclusion This methods has confirmed the actual risk levels of the work sites, using the test data in work place, but has a shortage while the sites contacted with physical agents such as noise and heat.
|
|
Received: 23 March 2016
Published: 11 December 2017
|
|
|
|
|
|
[1] 石峻岭,吴世达,陈健.生活垃圾焚烧作业职业病危害风险评估研究[J].职业卫生与应急救援,2013,31(2):74-77.
[2]杨艳,余善法,王思华.职业危害风险评估与管理模式关系初探[J].职业卫生与应急救援,2012,30(3):127-130.
[3]杨杰,汪庆庆.建设项目职业病危害预评价方法应用及研究进展[J].中国卫生工程学,2009,8(6):369-372.
[4]丁钢强,张美辨.国外职业健康风险评估指南[M].上海:复旦大学出版社,2014:185-193.
[5]中华人民共和国卫生部.工作场所有害因素职业接触限值第1部分:化学有害因素:GBZ 2.1—2007[S].北京:人民卫生出版社,2008.[6]中华人民共和国卫生部.工作场所空气中有害物质监测的采样规范:GBZ 159—2004[S].北京:人民卫生出版社,2004.
[7]Occupational Safety and Health Division, Ministry of Manpower (Singapore). A Semi-quantitative Method to Assess Occupational Exposure to Harmful Chemicals[EB/OL].(2010-12-18)[2016-03-16].http://www.mom.gov.sg/workplace-safety-health/resources.
[8]中华人民共和国卫生部.职业性急性化学物中毒性神经系统疾病诊断标准:GBZ 76—2002[S].北京:人民卫生出版社,2002.
[9]孙桂范,邬堂春,牛侨,等.职业卫生与职业医学[M].7版.北京:人民卫生出版社,2012:107-113,169-196.
[10]姜彩霞,杨章萍,张旭慧.职业危害风险评价法在某染料中间体化工项目中的应用[J].中国卫生检验杂志,2013,23(14):2961-2963.
[11]黄德寅,刘茂,薄亚莉,等.苯乙烯生产工艺中主要职业病危害风险分析[J].中国工业医学杂志,2008,21(3):205-207.
[12]黄德寅,薄亚莉,管树利,等.化学物质职业暴露健康风险分级方法的研究及应用[J].中国工业医学杂志,2009,22(1):69-72.
[13]陈昌可,盛金芳,李常勇.浙江省富阳市造纸行业职业危害风险评估[J].环境与职业医学,2014,31(7):527-530.
[14]陈顺育,郭进平,王雪妮.基于AHP-风险矩阵法的矿山职业危害风险评估[J].金属矿山,2011,423(9):149-168.
[15]章剑,施爱民,陈献文,等.半定量职业危害风险评估法在某市电焊行业锰危害因素评价中的应用[J].中国工业医学杂志,2014,27(4):310-311.
[16]余晓峰,韩丽芳,谢凯蕾,等.罗马尼亚职业事故和职业病风险评估方法在某贵金属冶炼厂的应用效果[J].浙江预防医学,2016,28(2):186-188.
|
|
|
|
