|
|
|
| Monitoring results of key occupational hazard factors in manufacturing enterprises in Jiading District |
| ZHAO Jianwei, MENG Wei, PAN Li, YU Hongjie, CHEN Xiaogui
|
| Jiading District Center for Disease Control and Prevention (Jiading District Institute of Public Health Supervision), Shanghai 201821, China |
|
|
|
|
Abstract Objective To analyze the monitoring results of key occupational hazard factors in manufacturing enterprises in Jiading District, Shanghai Municipality, so as to provide a basis for differentiated occupational disease prevention and control. Methods In December 2025, data on key occupational hazard factors in monitored enterprises in Jiading District from 2020 to 2025 were collected through the Workplace Occupational Hazard Monitoring System, including enterprise size, industry type and economic ownership type. A descriptive analysis was conducted on the over-standard status of eight key occupational hazard factors, the configuration of protective facilities, the setup of warning signs, the distribution of personal protective equipment, and the results of occupational health examinations in manufacturing enterprises. Results A total of 359 manufacturing enterprises were monitored, with 3 182 monitoring positions and 661 over-standard positions, with an over-standard rate of 20.77%. The over-standard rate of noise was 43.54%, and over-standard rates were relatively high in large enterprises, automobile manufacturing industry and Hong Kong, Macao and Taiwan-invested enterprises, at 52.03%, 56.05% and 63.78%, respectively. The over-standard rate of silica dust was 13.57%, and the over-standard rates were relatively high in medium-sized enterprises, metal products industry and Hong Kong, Macao and Taiwan-invested enterprises, at 20.00%, 22.22% and 46.15%, respectively. The over-standard rate of welding fume was 0.91%, and over-standard rates were relatively high in small enterprises, metal products industry and Hong Kong, Macao and Taiwan-invested enterprises, at 1.21%, 2.94% and 7.69%, respectively. The over-standard rates of chemical factors ranged from 0 to 3.69%. Among them, the over-standard rates of toluene and xylene were relatively high in micro enterprises (6.82% and 6.67%). while the over-standard rate of manganese and its compounds was relatively high in small enterprises (1.05%). The over-standard rate of toluene was relatively high in the general equipment manufacturing industry (6.25%), the over-standard rate of xylene was relatively high in the special equipment manufacturing industry (20.00%), and the over-standard rate of manganese and its compounds was relatively high in the metal products industry (2.94%). The over-standard rate of toluene was relatively high in foreign-invested enterprises, at 3.06%; the over-standard rate of xylene was relatively high in domestic-invested enterprises, at 4.05%; and the over-standard rate of manganese and its compounds was relatively high in Hong Kong, Macao and Taiwan-invested enterprises, at 2.70%. The setting rates of protective facilities for noise, productive dust and chemical factors were 40.23%, 86.08% and 81.99%, respectively. The distribution rates of personal protective equipment were 93.29%, 88.29% and 71.38%, respectively. The rates of required re-examinations for noise, welding fume and benzene were relatively high, at 5.62%, 2.23% and 2.20%, respectively. With the exception of ethylbenzene, the completion rates of re-examinations for the other seven occupational hazard factors all exceeded 70.00%. The abnormal rate of noise-related physical examinations was relatively high, at 2.42%. Conclusions The over-standard rate of occupational hazard factor positions in manufacturing enterprises was relatively low in Jiading District. Noise and silica dust were the key targets for prevention and control. The setting rate of protective facilities and the distribution rate of personal protective equipment still need to be improved, and the overall completion rate of re-examinations was relatively high.
|
|
Received: 13 August 2026
Revised: 29 September 2026
Published: 27 October 2026
|
|
|
|
|
|
[1] 中华人民共和国国家卫生健康委员会.健康中国行动(2019—2030年)[EB/OL].[2026-09-29].https://www.nhc.gov.cn/guihuaxxs/c100133/201907/2a6ed52f1c264203b5351bdbbadd2da8.shtml. [2] 中华人民共和国国家卫生健康委员会.国家职业病防治规划(2021—2025年)[EB/OL].[2026-09-29].https://www.nhc.gov.cn/zyjks/c100153/202112/a53d34e26c78494281bcc89b61277611.shtml. [3] 蒲立力,高童宁,尹艳.2020—2025年上海市制造业职业病危害现状与时空变化趋势分析[J].环境与职业医学,2026,43(8):994-1001. [4] 张新生,王苗苗,李春平,等. 2014—2024年无锡市新发职业病流行病学特征分析[J].中国工业医学杂志,2026,39(3):280-284. [5] 王艳平,桑玉红.2007—2024年辽源市职业病发病特征与趋势[J].中国卫生工程学,2026,25(3):327-330. [6] 中华人民共和国国家统计局.统计上大中小微型企业划分办法(2017)[EB/OL].[2026-09-29].https://www.stats.gov.cn/xw/tjxw/tzgg/202302/t20230202_1893916.html. [7] GB/T4754—2017 国民经济行业分类[S]. [8] 中华人民共和国国家统计局,中华人民共和国国家市场监督管理总局.关于市场主体统计分类的划分规定[EB/OL].[2026-09-29].https://www.stats.gov.cn/sj/tjbz/gjtjbz/202302/t20230213_1902786.html. [9] 陈进国,郑丽辉,庄灵杰.福建省重点职业病监测企业粉尘中游离二氧化硅含量调查[J].海峡预防医学杂志,2023,29(2):55-57. [10] GBZ/T 189.8—2007 工作场所物理因素测量第8部分:噪声[S]. [11] GBZ/T 192.1—2025 工作场所空气中粉尘测定标准第l部分:总粉尘浓度[S]. [12] GBZ/T 192.2—2007 工作场所空气中粉尘测定第2部分:呼吸性粉尘浓度[S]. [13] GBZ/T 300.66—2017 工作场所空气有毒物质测定第66部分:苯、甲苯、二甲苯和乙苯[S]. [14] GBZ/T 300.17—2017 工作场所空气有毒物质测定第17部分:锰及其化合物[S]. [15] GBZ 2.2—2007 工作场所有害因素职业接触限值第2部分:物理因素[S]. [16] GBZ 2.1—2019 工作场所有害因素职业接触限值第l部分:化学有害因素[S]. [17] 唐学平,刘月红.泉州市2020—2023年重点职业病危害因素监测分析[J]. 海峡预防医学杂志,2024,30(4):58-61. [18] 黄瑞,唐昆,程婷婷,等.六安市2019—2023年重点行业工作场所职业病危害因素监测与分析[J].安徽预防医学杂志,2025,31(6):466-471. [19] 张志文,高伟.淮北市不同规模企业职业病危害因素监测情况分析[J].中国工业医学杂志,2025,38(4):449-453. [20] 翟龙,高龙玉,郝康宇,等.2019—2021年青岛市工作场所职业病危害因素监测分析与职业健康风险评估[J].预防医学论坛,2024,30(4):291-295. [21] 李欣欣,柳安琪,王丹,等.2020年中国工业企业接触噪声劳动者听力损失流行病学特征分析[J].中华疾病控制杂志,2022,26(8):882-887. [22] 周斌,李月红,郭茹,等.噪声叠加和噪声衰减对职业卫生检测的影响分析[J].山东化工,2015,44(18):148-149. [23] 李爱华,叶研,胡丽,等.北京市重点行业噪声危害调查与分析[J].现代预防医学,2022,49(21):3894-3898. [24] 翁少凡,周伟,王雪毓,等.2022年深圳市工作场所噪声危害现状分析[J].中国工业医学杂志,2024,37(6):606-609. [25] 郑阅,潘绥,李东红.2022年福州市重点监测行业工作场所空气中矽尘监测结果分析[J].福建医药杂志,2024,46(7):82-85. [26] 郑晋南,张思雨,余悦,等.2020—2021年全国非金属矿物制品业企业粉尘及噪声监测结果分析[J].工业卫生与职业病,2024,50(4):308-312. [27] 张翠翠,张恒东,王建锋,等.江苏省2020—2022年工业企业噪声暴露水平监测[J].江苏预防医学,2024,35(1):105-108. [28] 林伟涛,廖春华,蔡颖,等.2015—2023年深圳市宝安区某街道新发职业性噪声聋发病特征[J].中国卫生工程学,2025,24(4):433-436. [29] 周珊宇,温贤忠,黄永顺,等.广东省2013—2022年物理因素所致职业病流行病学特征和风险分析[J].中国职业医学,2023,50(3):279-284. |
|
|
|